Paver Installation Cost Calculator
Estimate what it costs to install pavers - for a patio, walkway, driveway or pool deck. Enter the area and pick a paver type, and you'll get a US national-average installed price range covering pavers, base prep and labor. (Costing a whole patio in concrete or stone? Use the patio cost calculator.)
100% in your browser - no upload, no sign-up.
Estimated cost
-
-
Enter the area to see an estimate.
How to estimate
- Measure the area you're covering - length × width.
- Pick the grade or material that matches your project.
- Read the estimated installed cost range for your area.
What drives the cost
- Paver material - concrete pavers are cheapest; clay brick and interlocking pavers cost more, natural stone (travertine, flagstone) and porcelain most.
- Base preparation - excavation, a compacted gravel base and bedding sand are most of the labor; pavers are only about 20% of the budget.
- Pattern and cuts - herringbone, circles, borders and curved edges need more cutting than a straight running bond.
- Application - a driveway needs a thicker, stronger base than a walkway or patio, raising the rate.
- Edge restraint and joints - plastic or concrete edging and polymeric joint sand lock the field in and add cost.
- Local labor rates - the biggest regional swing.
Average installed cost
| Grade | Per ft² (installed) | Typical |
|---|---|---|
| Concrete pavers | $10–$17 | Budget, patios & walkways |
| Brick / interlocking | $14–$24 | Popular, durable, repairable |
| Natural stone / porcelain | $20–$40 | Premium flagstone, travertine |
Ranges are national averages and vary with region, prep and material - a starting point, not a quote.
Frequently asked questions
- How much does it cost to install pavers?
- Installed, concrete pavers run about $10–$17 per square foot (pavers + base + labor), brick and interlocking pavers $14–$24, and natural stone or porcelain $20–$40. A 12×16 ft (192 ft²) concrete-paver patio lands roughly $1,900–$3,300. Enter your area above.
- Why is labor most of the paver cost?
- The pavers themselves are only about 20% of the budget. The other 80% is excavation, a compacted gravel base, bedding sand, cutting, laying and jointing - labor alone runs $6–$11 per square foot.
- Are pavers more expensive than a poured concrete slab?
- Yes upfront - a plain concrete slab runs about $6–$15/ft² versus $10–$24 for pavers. But pavers resist cracking and individual units can be lifted and reset, so many owners find them cheaper to maintain over time.
- Why is this only an estimate?
- Paver type, base depth, pattern, application (patio vs driveway) and local labor all move the price. Use this national-average range as a starting point, then get local quotes.
Related guides
Embed this calculator
Copy this snippet to add this calculator to your site.
How Much Would Your Dream Renovation Cost?
6 questions · about 60 seconds · no email, nothing leaves your browser