Tile Installation Cost Calculator

Enter your floor or wall dimensions and your material and labor rates. You can also try an example budget while planning.

100% in your browser - no upload, no sign-up.

Area (ft)

Quick fill:

How do I measure this?
  1. Run a tape measure along one wall at floor level - that's the length.
  2. Measure the wall at a right angle to it - that's the width. For an L-shaped room, split it into rectangles and add them up.
  3. Write both numbers down before you shop - a phone photo of the tape works great.

Presets are rough starters - measure your real room before ordering.

Your rates

Enter both rates to calculate your subtotal. Leave both blank to try an example budget.

Material allowance

Practice budget

-

-

Enter the area to see an estimate.

Tiled floor with a price tag - tile installation cost calculator

How to estimate

  1. Measure the area to tile.
  2. Enter the material and labor rates per unit area from your quote.
  3. Set extra materials and check which items the quote includes.

What drives the cost

  • Tile material - ceramic is cheapest; porcelain, then natural stone (marble, travertine) cost more per ft².
  • Layout complexity - diagonal, herringbone and mosaic take more time than a straight grid.
  • Surface prep - leveling, backer board, removing old flooring and waterproofing (wet areas) add labor.
  • Room size and cuts - small bathrooms have more cuts per ft², nudging the rate up.
  • Local labor rates - the biggest regional swing.

Example rates for practice

GradePer ft² (installed)Typical
Basic$7–$12Ceramic, straight grid
Standard$12–$18Porcelain, quality install
Premium$18–$30Natural stone, intricate layout

Standards and price references

These sources cover different regions, dates and units. Use them to check the scope of a quote. The example rates above have no verified source or survey date.

Frequently asked questions

How much does it cost to tile a floor?
With the standard example rate of $12–$18 per ft², 100 ft² comes to $1,200–$1,800. Enter the rates from your quote to calculate your own subtotal.
How much of the cost is labor vs materials?
The split depends on the material, layout and site preparation. Ask for both rates per unit area so you can calculate the two amounts separately.
Does a diagonal or herringbone layout cost more?
Yes - angled and interlocking patterns need more cuts and precision, so installers charge more than a straight grid. Budget toward the higher end of the range.
Why is this only an estimate?
Your subtotal covers the items in the rates you enter. Check whether the quote includes removal, surface preparation, waterproofing, delivery and tax.

Related guides

Embed this calculator

Copy this snippet to add this calculator to your site.

Renovation Budget Practice
6 questions · about 60 seconds · no email required
Take the 60-second quiz →